Product Description:
PETG Shrink Film Widely used for a bottle(big diameter difference between bottleneck
and body) film labeling, eg.
Beverage bottles packaging, cleaning and bathing products packaging
and cosmetics packaging
Features:
- Product Name: PETG Shrink Film
- Length: 2500m - 5000m
- Material: PETG (Glycol-modified Polyetthylene Teraphthalate)
- Average Thickness Tolerance: ±10%
- Brand: HYF
- Width: 350mm - 1200mm
Technical Parameters:
| Parameters | Specification |
|---|
| Color | Transparent |
| Width Tolerance | ±5% |
| Shrinkage | Up To 78% |
| Length | 2500m - 5000m |
| Supply Ability | 12,000 Tons Per Year |
| Thickness | 30mic - 50mic |
| Density | 1.32 G/cm³ |
| Width | 350mm - 1200mm |
| Material | PETG (Glycol-modified Polyetthylene Teraphthalate) |
| Brand | HYF |
Applications:
Due to PETGH’s high shrinkage, transparent PETG Shrink Sleeve Label
Film is suitable for packaging with unique or curvy shape,
especially bottles with high and narrow neck like wine bottles.
1) Full or partial body shrink sleeves
2) Full or partial body roll sleeves
3) Multi-packs
4) Tamper-evident bands
5) Wine capsules and disk plates
Advantages Of PETG Shrink Film
- Environmental protection: PETG can be repeated recycling and
recovery of the cost is low; even if the trademarks used as energy
sources will not produce any toxic gases when be burned, no
pollution to the environment. PETGF heat shrink film makes a high
gold content on re-use opposed to PVC heat shrink film.
- High contractility: Being used the special production process,
PETGF heat shrink gets a relatively high shrinkage factor, its
lateral direction shrinkage even up to 78%, and can make the mark
achieve body-fitted on the containers in different shapes ( Even if
the large difference sizes of a single container ) equably.
- Transparency: With the special chemical structure, PETGF heat
shrink film has good transparency and gloss which determines the
PETGF heat shrink film is easy colored, able to be produced into a
lot of beautiful trademark.
FAQ Of PETG Shrink Film
1) Can I have a sample order?
Yes, we welcome sample order to test and check quality.
Mixed samples are acceptable.
2) What is the lead time?
Sample needs about 7 days prepared; mass production time needs
15-25 days normally.
3) Do you have any MOQ limit?
Our MOQ is 1 ton
SeaPort: FOB Shanghai
4) What information should I let you know if I want to get a
quotation?
The external size of your products (Thick x Width x Length x
Shrinkage) and the quantity.
Workshop Of PETG Shrink Film
100,000 grade purification dust-free workshop
Constant temperature all the year around
Green pollution-free production environment
