Plain And Embossed Vacuum Metallized / Aluminized Paper For Wine
Packaging With 68gsm--83gsm
Product Information
| No | Property | Unit | Test Method | Value |
| 1 | Grammage | g/m2 | GB/T451.2 | ±3 |
| 2 | Moisture | % | GB/T462 | 5.5±1 |
| 3 | Wet Strength | MD | KN/m | GB/T465.2 | ≥1.0 |
| TD | KN/m | GB/T465.2 | ≥0.7 |
| 4 | Tensile Strength | MD | KN/m | GB/T453 | ≥3.5 |
| TD | KN/m | GB/T453 | ≥1.8 |
| 5 | Wet Tensile Strength | mN/m | GB/T14216 | ≥36 |
| 6 | Break Load | MD | mN | GB/T455.1 | ≥350 |
| TD | mN | GB/T455.1 | ≥350 |
| 7 | Reverse Side COBB (60s) | g/m2 | GB/T1540 | 15±5 |
|
| 8 | Aluminum Firmness | % | _________ | ≥95 |
|
| 9 | Alkali Resistance | S | _________ | ≤90 |
| 10 | Gloss(45°) | % | GB/T8941.2 | EMBOSSED≥200 |
| _________ | _________ | PLAIN≥300 |
| 11 | Smoothness | S | GB/T456 | EMBOSSED≥600 |
| _________ | _________ | PLAIN≥1000
|
Type: Plain & Embossed
Grammage: 68gsm, 71gsm, 73gsm ( up to you)
Width: 200-2000mm
Length: 2500-4000m
Color: Silver, golden and etc.
Sample: 150-200m
Products Show
Surface Quality
a) The surface have glossy finish, not be oxidized & blackiness.
b) Surface is free from unmetallized spots, scratches, dents,
pinholes, bubbles.
c) Suitable for offset printing, rotogravure printing and flexible
printing
d) Easy to stick or remove from bottles
e) High water absorbency
f) Excellent properties when use for labels
g) With excellent adhesion ability with ink, the paper remains flat
with no rolling of edges
Winding Quality
i) Sufficiently tight so that it does not get telescoped, no
wrinkles creases, ripples present.
ii) Free from bagginess, flappiness, no uplifted edge, unflush
winding.
iii) The roll is unwound without blocking.
Application
Widely used in beer label, wine, beverages and etc, which has a
good performance for printing.
Packaging and Shipping
1. 30% deposit by T/T before producing, balance paid before
shipment. And L/C, Western Union accepted.
2. By express. By sea. By air.
FAQ:
1. Do your metallized materials require any preparation (priming)
before printing?
No, they don’t, as the board and paper produced by HYF carry a
finishing primer ensuring high-quality printing with UV and foil
offset alkali proof inks.
2. What are the advantages and disadvantages of printing on the
metallized surface of UV-curable inks?
Printing with UV inks is a more versatile and environmentally
friendly method for non-absorbent materials. The advantage of this
technology is that it requires no anti-set-off powder and the ink
dries almost instantly.
However, UV inks are more expensive than foil ones and can be used
only for special printing machines that feature extra driers. This
makes the process more energy consuming and expensive when using
the UV inks.
3. What is the right way to store metallized materials?
Metallized paper and boards should be stored enclosed in their
original packaging to ensure a constant humidity indicator.
Before printing, the material should be acclimatized in the
production room for at least 2 hours. If the difference between the
temperatures of the metal and the room is big, the acclimatization
should be prolonged to 24 hours.
